eDRUMin 1.6.2 BETA

[Rob]

I did make a small change in version 1.6.1 that might be affecting this, but ultimately the cause of the problem is that your thresh control is too low, or your rimshot range control needs to be adjusted.

[monospace]

Just checking in to report that I have not had a crash since 1.6.1.7. Whatever it is you did worked. Cheers.

[Rob]

Great. Thanks for confirming.

[hb1980]

Can you post a screenshot of your settings?

Hi Rob

My settings are below. I don't use cross-stick on this drum (BR-1 instead) hence the x-stick threshold is right down.

The only way I can get this false triggering to stop on 1.6.1 and 1.6.2 beta is to set the rimshot threshold so high that it's not playing rimshots at all.

With the same settings when I go back to 1.6.0.9 the problem's gone completely.

edrumin.jpg (152.67 KiB) Viewed 1178 times

[Rob]

As I said, your thresh looks too low and you probably need to adjust your rimshot range control. The way you have it setup, I don't think you can even trigger a sidestick. I think you'll find your problem will go away once you make those changes.

Alternatively, stick to version 1.6.0.9. In that version there is a bit of a hack to prevent soft hits on the head from triggering sidestick. But the hack also prevents soft sidesticks from registering. It was removed in version 1.6.1 for a more accurate method of dealing with very soft hits.

[hb1980]

Hi Rob

Sorry, I probably wasn't clear. I use a BR-1 for sidestick which is why the sidestick threshold is right down. I did try moving this around anyway but it didn't effect the sporadic rimshot triggers. I assume if I'm not using sidestick sensing there is no harm in setting the threshold to min?

In terms of the rimshot threshold - this is the vertical line? If I move it further to the right (create smaller green area) it makes it harder to trigger a rim shot and moving it to the left lowers the rimshot threshold making it easier to trigger a rimshot?

Even moving this as far to the right as possible and still making rimshots viable I get the sporadic rimshot issue on a hit on the newer FW.

I was hoping to move to newer FW as I've found 1.6.0.9 to be a bit buggy in other places, but will be sticking with it for a gig today. I'll try and experiment a bit more next week with the beta.

[Rob]

This is the threshold that is too low.

thisThreshold.png (7.26 KiB) Viewed 1150 times

Can I see your settings for the BT-1?

[Dadwrshpdrum]

Crash report. I had just got done with switching a HH to HH levels. Then I started playing with app in background. Crash. I have not had a crash in a long time so I suspect it had something to do with the HH levels.

[jacko]

just reporting - was able to download 1.6.2.2 today. have not been able to reproduce the long midi notes

excellent

thanks

[Rob]

Crash report. I had just got done with switching a HH to HH levels. Then I started playing with app in background. Crash. I have not had a crash in a long time so I suspect it had something to do with the HH levels.

I'll look into it next week. Thanks for reporting.