eDRUMin 1.6 BETA

[monospace]

Great work, it works great on my CY-15RMG,I used the bow tip and bow shank in the core library and the bow tip 1 and bow tip 2 in death.

I agree that the technology part of it works great, but sound wise, in the Core Library, using it to switch between tip and shank sounds and feels terrible and wrong to me, so I ended up disabling Cymbal PS for now. Using a plain old Velocity Gate works much better.

None of the currently available SDXs sound appealing to me, so hopefully a future SD3 Core update will make this feature worth enabling again for me.

[jacko]

If I select the Lemon 18" preset, the pad type stays at 'Roland 3-Zone Cymbal' and the bell sensitivity is poor (poor to the point of not really being useable).

Fixed. If the input that becomes the Bell input was in stereo mode and setup as a mesh pad, the switch sensitivity of the bell input was affected.

excellent. I'll wait for the next update, have another go at dialling in the positional sensing and send pics of the settings then

[Rob]

Changes in Build 6

• Fixed a potential bell sensitivity issue for inputs setup as Roland 3-Way Ride.
• Fixed an issue when resetting an input that was setup as Roland 3-Way Ride.
• Fixed an issue on Windows where the UI might go completely black when the windows was moved partially offscreen.

https://www.audiofront.net/eDRUMin_Cont ... .6.0.6.zip
https://www.audiofront.net/eDRUMin_Cont ... .6.0.6.zip

[lalo]

If you have a multimeter, I would like to know what voltage there is between the tip and ground of the cable when the drone hihat is powered, but not connected to the eDRUMin. That would allow me to do some tests here to see if there's a workaround.

Still no reply from Mike, Monospace, can you ask him on your end?

[monospace]

Still no reply from Mike, Monospace, can you ask him on your end?

My Drone hihat should arrive a week from now. I'll be happy to measure whatever needs measuring.

[Rob]

Changes in Build 7

• Improved BT-1 Crosstalk mode performance. BT-1 crosstalk talk control now applies crosstalk to linked pad. Linked pad can trigger any articulations when hit at the same time as the BT-1.
• Fixed an issue an that could lead to low velocity sidestick articulations when hitting a mesh pad very lightly.
• Fixed an issue that should smoothen drum rolls.

https://www.audiofront.net/eDRUMin_Cont ... .6.0.7.zip
https://www.audiofront.net/eDRUMin_Cont ... .6.0.7.zip

[lalo]

1. Select Bank 1.
2. Select SD3 map.
3. Click the ride icon.
4. Select Bank 2.
5. Select the SSD map.
6. Clip the ride icon.

This procedure works for me. If you are power cycling the device and it's not set to auto save, then make sure you hit save.

Well don’t worry, it’s easier for me to map it in the VSTi itself rather than a different map in the edrumin for every vsti. I saved it in the Vsti and next time I open it it’s just there

[lalo]

Changes in Build 7

• Improved BT-1 Crosstalk mode performance. BT-1 crosstalk talk control now applies crosstalk to linked pad. Linked pad can trigger any articulations when hit at the same time as the BT-1.
• Fixed an issue an that could lead to low velocity sidestick articulations when hitting a mesh pad very lightly.
• Fixed an issue that should smoothen drum rolls.

https://www.audiofront.net/eDRUMin_Cont ... .6.0.7.zip
https://www.audiofront.net/eDRUMin_Cont ... .6.0.7.zip

I know it’s a lot of work but could you update the presets with the latest beta? I always feel there’s some quirks when installing the latest beta but the preset for my pads is outdated

[Rob]

I don't understand what you are asking for. Factory presets have been updated and new ones added. Presets saved with previous versions of the control application should be updated on the fly. Are you having a specific problem?

[lalo]

Oh, ok, I thought the presets remained on the OS version they were created on, all is working fine here, no complaints