eDRUMin version 1.3.1 BETA

[Rob]

Changes in build 6

• Pedal Sensing will continue to function when a pedal / hihat controller is disconnected and reconnected but the cable remains plugged into the pedal input.
• Inadvertent bank changes are prevented when a footswitch or sustain pedal is disconnected.
• Fixed small issues with momentary footswitches.

[Mylo]

Changes in build 5

• Pedal Sensing will continue to function when a pedal / hihat controller is disconnected and reconnected but the cable remains plugged into the pedal input.
• Inadvertent bank changes are prevented when a footswitch or sustain pedal is disconnected.
• Fixed small issues with momentary footswitches.

I’m already on 1.3.1.5. Is this supposed to be 1.3.1.6?

[Rob]

Yup, it's supposed to be build 6. I've updated the first post.

[Mylo]

Yup, it's supposed to be build 6. I've updated the first post.

All good now. Thanks.

[lalo]

There's now a dual zone metal cymbal pad type to choose from, it works perfectly with my diamond drum low volume zildjian dual zone crashes with choke

[monospace]

Build 6: with the Pedal editor screen open while playing, the display is cycling between the 4 different pedal modes. Not all the time, it’s rather random. Doesn’t appear to affect playability, but looks a bit disconcerting.

[Rob]

Okay. You are using a vh11 right. Better disable pedal sensing for the time being.

[monospace]

I’ve got a VH-10, if it matters. Pedal sensing was turned off already, but I switched it back on, then off again, to be sure. Seems to resolve the issue.

[dsteinschneider]

Haven't testing the unplugging the hi-hat pedal but noticed the issues before. I usually power cycled the eDRUMin if I did anything with the pedal.

[dsteinschneider]

Haven't testing the unplugging the hi-hat pedal but noticed the issues before. I usually power cycled the eDRUMin if I did anything with the pedal.