eDRUMin 1.3 BETA now available (again)

[Rob]

Email me at support at audiofront dot net

[monospace]

Power cycle and see if it comes back up.

Trigger module is working fine; control app is showing a default screen with four inputs, greyed out.

[Rob]

I changed a compiler optimization setting in that build. Probably shouldn't have. Don't update the ED4. Mine hung. I'll make a new build with the old optimization setting and we'll recover your device.

[monospace]

Don't update the ED4.

Hah, too late! I always update both devices.

[monospace]

I took the ED4 to another computer with nothing else connected to it, and the update went through. All is well with Build 28.

[Rob]

I've had ED10 with another ED10 in the Host port running on iOS for 12 hours now without issue. I'll keep it running all day and play when I have time, but I think it's really resolved now.

[Polyphonics]

What firmware were the modules running?

Sorry I took a while to respond, it's just the one module which is on 1.3.0.12, I think the others were just on 1.3

Here should be a video of the calibration issue: https://drive.google.com/file/d/1MrNnhJ ... sp=sharing

If you can view the video, it will show how the green bar varies greatly in size, it would do that at random.

[Rob]

Can you update to the latest version. If the problem persists, can you make another video showing the entire UI so that I can see what the pedal sensing and polarity controls are doing.

[Polyphonics]

Will do,

On the other settings, I always turn pedal sense off but it would periodically turn back on (not always when this glitch was happening either), polarity is reversed or auto, I often had to change it back and forth to "wake up" the pedal

[lalo]

No more crashes or locks here since yesterday when I installed build 28.