eDRUMin 1.3 BETA now available (again)

[pwohlfah]

in build 20 i also can't get a splash sound.

in build 14 i only have to maximise splash sense, I can trigger the splash sound easily.

I have a real Hihat stand with vh-10.
the hihat stand is from Millenium 850.
maybe it is to slow?

The Changes since build 15 I tried 15,16,18,20 but no Splash possible for me.


What settings do you use to get a reliable hihat splash sound?

regards, Peter

[Rob]

Attach a screenshot of your settings and I'll take a look.

[Mylo]

in build 20 i also can't get a splash sound.

in build 14 i only have to maximise splash sense, I can trigger the splash sound easily.

I have a real Hihat stand with vh-10.
the hihat stand is from Millenium 850.
maybe it is to slow?

The Changes since build 15 I tried 15,16,18,20 but no Splash possible for me.


What settings do you use to get a reliable hihat splash sound?

regards, Peter

One of the things I did to troubleshoot the splash was to remove as much as I could from equation. I removed the cymbal. Then worked the controller with my hand to take the stand out of the way. My goal was to get the splash note to flash in the controller. I finally did when I set my splash sensitivity to 55. My mode is set to Pedal and gain is set to 30.

[pwohlfah]

Thanks for your replys

I am currently Using MODO drum.


I attached a screen shot of the Pedal editor with the settings that works for me
with 1.3 buld 14

Peter

[Rob]

Try putting the xtalk control at about 40 and increase the travel control a bit too.

[pwohlfah]

unfortunately there is no change.
I won't get a splash.
the chick sound is triggered, but not the splash.
splash is also not shown in the eDrumin app.
even without cymbal with the fingers I am not able to invoke the hihat slash with th vh-10
i will try at the weekend.

Thank you,
Peter

[Rob]

Next week I'll put together a couple videos. That should help.

[Rob]

Btw, it still doesn't look like you're on build 20.

[lalo]

You can download modo drum demo and it will work in full mode for 10 days! I just downloaded it and set up the hihat and it triggers splashes and chicks perfectly, attached the hihat mapping,

Screenshot 2020-09-04 at 10.50.03.png (1.51 MiB) Viewed 992 times

My edrumin controller looks like this:

Screenshot 2020-09-04 at 10.50.03.png (1.51 MiB) Viewed 992 times

[pwohlfah]

Rob, I am now on build 20, but the screenshot i Attached was 14 (the build that was working for my Hihat)

Thank you for your effort, Lalo and Rob!.
I really apreciate your help,
I will try again on saturday night, when I have time!

Peter