Roland BT-1: by default in "switch" mode (i.e. with internal crosstalk cancellation enabled; reduced dynamic range)
When used in dual mono mode, *and* reversing polarity or using a splitter cable, Tip will enable "sensor" mode.
Roland PD-80R: head/rim/rimshot
Unofficially supported devices
Re: Unofficially supported devices
Miscellaneous Roland triggers. ED-10 + ED-4. MacBook Pro (2015), 16G RAM, Big Sur. Superior Drummer 3. Logic Pro.
Re: Unofficially supported devices
Thanks for that. At some point I'll add a setting for mono mode so that you can select either the tip of the ring signal. That will eliminate the need for the adapter.
Re: Unofficially supported devices
Roland CY12 R/C
This cymbal _almost_ works with bell sense on one input, but triggering on the bell is not accurate or consistent. Tried with cy8, cy13 and cy15 setting.
This cymbal _almost_ works with bell sense on one input, but triggering on the bell is not accurate or consistent. Tried with cy8, cy13 and cy15 setting.
Re: Unofficially supported devices
Adding Goedrum HH controller and dual zone 13 pad to this list. No bell sense though.
Re: Unofficially supported devices
I’m not too familiar with Goedrum so when you say “pad” but talk about “no bell sense” can you clarify? Is this a 13” Goedrum cymbal pad you’re talking about?MWJT42 wrote:Adding Goedrum HH controller and dual zone 13 pad to this list. No bell sense though.
Re: Unofficially supported devices
Yes,
The goedrum GHC HH controller works very well, a great cheap alternative to the VH11.
The 13 (older model) pad functions well too, but doesn’t seem have bell sense - not that I want it on a hi hat.
The goedrum GHC HH controller works very well, a great cheap alternative to the VH11.
The 13 (older model) pad functions well too, but doesn’t seem have bell sense - not that I want it on a hi hat.
Re: Unofficially supported devices
Using drone halo triggers, the rims are not that responsive, the rest works ok.
Re: Unofficially supported devices
Roland CY12R/C is now working as a three-zone ride with a single input to the eDRUMin (using the CY13R Bell Sense setting).
Re: Unofficially supported devices
Roland CY-5
Roland KD-7
Roland KD-7
Ludwig Breakbeats A2E | DDRUM Redshots, Roland RT-30K | Roland PD-120, CY-5, CY-14 (2), CY-15R, VH-10, Yamaha PCY155 | (2) ED10 + ED4 | SD3 + EZD3 + BFD3 | ASUS ROG Zephyrus G14 40GB | Behringer UMC404HD
-
- Posts: 7
- Joined: Fri Aug 28, 2020 8:24 pm
Re: Unofficially supported devices
My pintech hihat does not work unless I unplug the bell.