Jobeky 3and 4 way multipoint trigger?

Post Reply
Ronyd
Posts: 199
Joined: Sun Apr 18, 2021 12:20 pm

Jobeky 3and 4 way multipoint trigger?

Post by Ronyd »

Hey rob

Would they be supported with eDrumin?
https://jobekydrums.co.uk/product-cate ... -trigger/

Thankx
Ron
MisterE
Posts: 144
Joined: Sat Jul 25, 2020 1:19 am

Re: Jobeky 3and 4 way multipoint trigger?

Post by MisterE »

In case you weren't aware, this thread is the best place to look:

viewtopic.php?f=29&t=611

It lists which Jobeky triggers have been tested by users here and their results.
nemo
Posts: 79
Joined: Tue Mar 01, 2022 6:55 am

Re: Jobeky 3and 4 way multipoint trigger?

Post by nemo »

Hi, just wanted to bump this thread.
Does anybody use this trigger? Eg. with ATV aD-S13 settings?
User avatar
Rob
Site Admin
Posts: 4660
Joined: Sat Aug 01, 2009 2:04 pm

Re: Jobeky 3and 4 way multipoint trigger?

Post by Rob »

They will work, but I just can't guarantee possitional sensing will be supported or not.
nemo
Posts: 79
Joined: Tue Mar 01, 2022 6:55 am

Re: Jobeky 3and 4 way multipoint trigger?

Post by nemo »

Thanks Rob. This is exactly what I would like to know actually. I asked Jobeky via email about positional sensing twice, but no response.
javiercarrillo
Posts: 20
Joined: Fri Oct 16, 2020 6:41 pm

Re: Jobeky 3and 4 way multipoint trigger?

Post by javiercarrillo »

Did you get this trigger in the end? I'm interested in the same (since Jobeky says it has no hotspotting issues) but I'm not sure if positional sensing will work.
nemo
Posts: 79
Joined: Tue Mar 01, 2022 6:55 am

Re: Jobeky 3and 4 way multipoint trigger?

Post by nemo »

Nope, I did not order since I had not received any answer.

I used to have atv ad-s13 and it worked (positional sensing) properly.

So instead of Jobeky I just bought atv at-xdp13m being sure it will work (ps) as this seems to be the same construction and producer.
Surprise - ps does not work reliably :-(

I returned back to my DIY build (3 center cones, several rim cones, 2 or 3 pots, center settings)
... at least till Rob decides to go further the "3 external cones" path (if at all). But this seems to be a lot of work (like repeating the work done for center cone) - my guess.
End of my story :-)
Post Reply