Hey rob
Would they be supported with eDrumin?
https://jobekydrums.co.uk/product-cate ... -trigger/
Thankx
Ron
Jobeky 3and 4 way multipoint trigger?
Re: Jobeky 3and 4 way multipoint trigger?
In case you weren't aware, this thread is the best place to look:
viewtopic.php?f=29&t=611
It lists which Jobeky triggers have been tested by users here and their results.
viewtopic.php?f=29&t=611
It lists which Jobeky triggers have been tested by users here and their results.
Re: Jobeky 3and 4 way multipoint trigger?
Hi, just wanted to bump this thread.
Does anybody use this trigger? Eg. with ATV aD-S13 settings?
Does anybody use this trigger? Eg. with ATV aD-S13 settings?
Re: Jobeky 3and 4 way multipoint trigger?
They will work, but I just can't guarantee possitional sensing will be supported or not.
Re: Jobeky 3and 4 way multipoint trigger?
Thanks Rob. This is exactly what I would like to know actually. I asked Jobeky via email about positional sensing twice, but no response.
-
- Posts: 20
- Joined: Fri Oct 16, 2020 6:41 pm
Re: Jobeky 3and 4 way multipoint trigger?
Did you get this trigger in the end? I'm interested in the same (since Jobeky says it has no hotspotting issues) but I'm not sure if positional sensing will work.
Re: Jobeky 3and 4 way multipoint trigger?
Nope, I did not order since I had not received any answer.
I used to have atv ad-s13 and it worked (positional sensing) properly.
So instead of Jobeky I just bought atv at-xdp13m being sure it will work (ps) as this seems to be the same construction and producer.
Surprise - ps does not work reliably
I returned back to my DIY build (3 center cones, several rim cones, 2 or 3 pots, center settings)
... at least till Rob decides to go further the "3 external cones" path (if at all). But this seems to be a lot of work (like repeating the work done for center cone) - my guess.
End of my story
I used to have atv ad-s13 and it worked (positional sensing) properly.
So instead of Jobeky I just bought atv at-xdp13m being sure it will work (ps) as this seems to be the same construction and producer.
Surprise - ps does not work reliably
I returned back to my DIY build (3 center cones, several rim cones, 2 or 3 pots, center settings)
... at least till Rob decides to go further the "3 external cones" path (if at all). But this seems to be a lot of work (like repeating the work done for center cone) - my guess.
End of my story