Alesis real hat continuous controller pedal preset recommendation

[Andrewmsb]

Hi folks. Would anyone happen to have a Alesis real hat continuous controller pedal preset. I can't seem to get it to be recognized and can't even get it to a starting point. I have both the pedal and cymbal connected to an eDRUMin 4. I am trying to get it engaged for Superior Drummer 3 and I have loaded that map. I have set up the Hihat cymbal to a starting point, but it's not linked to the controller. I've tried a few presets but nothing worked. Even auto and calibrate nothing seems to work. I must be missing something, I tried it with an HH60 and had the same issue. I know the Alesis controller worked on my dm10 kit a month ago. TIA

[Rob]

Can you please post a screenshot of your settings for your hihat pedal?

[Andrewmsb]

Hi Rob, Hope you had a great vacation. I appreciate you help with this. It's like they aren't linked or something. I saw on your levels video there was a way to link them but could not find it here.

cc alesis.png (155.15 KiB) Viewed 2883 times

[Rob]

And do you have model number for your hihat? I'm not familiar with Alesis hihat pedal wiring and need to do some research.

[Rob]

Can you set the polarity to 'Roland' and then calibrate (right now it's set to 'Auto'). Can you let me know if that works?

[Andrewmsb]

Hi Rob,

I had the same results with all settings. Yamaha and Roland. I even tried with a Yamaha HH60 and got the same results as well. https://www.alesis.com/products/view/realhat-pedal I thought it would be wired the same as Roland. I managed to figure out 3 zones from 1 trigger input on the Alesis 14 inch ride. There is no link for the pedal input like the level input is there?

[Andrewmsb]

Hi Rob,

I had the same results with all settings. Yamaha and Roland. I even tried with a Yamaha HH60 and got the same results as well. https://www.alesis.com/products/view/realhat-pedal I thought it would be wired the same as Roland. I managed to figure out 3 zones from 1 trigger input on the Alesis 14 inch ride. There is no link for the pedal input like the level input is there?

[Rob]

Thanks for the link. Yes, it should the same as a Roland style pedal. Your are using a TRS cable?

Also, do you know what firmware version you are using?

[Andrewmsb]

Thanks for the link. Yes, it should the same as a Roland style pedal. Your are using a TRS cable?

Also, do you know what firmware version you are using?

Rob,

It was the latest firmware. I had changed it to Roland and swapped out the Yamaha hh connection trs cable and just like that it worked. This was the same cable that I had used previously on my hh60 so maybe it went bad. I will test it later. All is well now. Time to start dialing it all in. So definitely using the Roland cc is the ticket.Thanks for your help.