eDRUMin version 2.3 BETA

AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

It's in the DIY page.
User avatar
Rob
Site Admin
Posts: 4657
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

I posted build 16.

Changes
  • Fixed a triggering issue that can affect some center mounted piezo pads.
  • Changed the default velocity curve settings.
pwohlfah
Posts: 9
Joined: Mon Mar 02, 2020 12:43 am

Re: eDRUMin version 2.3 BETA

Post by pwohlfah »

Hi Rob, build 16 link (mac os) doesn't work

Peter
User avatar
Rob
Site Admin
Posts: 4657
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

Should work now.
techministry
Posts: 5
Joined: Mon Aug 08, 2022 3:09 am

Re: eDRUMin version 2.3 BETA

Post by techministry »

Hi-hat pedal not working correctly since build 15.

I've upgraded to build 15 last week and everything worked fine until I changed "Edge Sense" setting on the hi-hat. It was previously on setting 99 and I changed it to 75. Since then the hi-hat sounds like it's slightly oped and pedal movement has no effect on it. I changed the "Edge Sense" setting back to 99, but the problem persists. Upgraded to build 16, same problem.

Just FYI pedal is correctly showing its position in Edrumin software, but the hi-hat sound doesnt change with pedal movement.
User avatar
Rob
Site Admin
Posts: 4657
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

I don't think the issue is related to the BETA. Sounds like you changed something else. Please post screenshots of your settings for your hihat pedal and hihat cymbal.
User avatar
dsteinschneider
Posts: 413
Joined: Sun Sep 15, 2019 11:17 pm

Re: eDRUMin version 2.3 BETA

Post by dsteinschneider »

Hi Rob,

I wasn't able to participate in loading beta's the past two months. Just loaded up the latest 2.3 beta. Thanks for all the upgrades - the expanded use of color in the Transient Scanning Controls (especially Thresh) is very helpful.

BTW, I've always updated through my powered d-link DUB-H4 USB hub, I think removing the USB hub warning is safe.

I appreciate the improved mouse control in the Rimshot Range control.

Thanks for all the improvements - the UI looks terrific.

The manual improvements are very good also.

Doug
TOP
Posts: 137
Joined: Mon Sep 04, 2023 1:06 am
Location: Indonesia

Re: eDRUMin version 2.3 BETA

Post by TOP »

Thanks 4 ur shares @dsteinschneider, so uve updated through powered usb hub? is it safe? how many ED u ve connected n is it always powered while u updsting it? ( Appologizes my couriousity... Please understand, we have to be extra careful with this rare amazing product
User avatar
Rob
Site Admin
Posts: 4657
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

I haven't had any report / experiences of updating issues when connected to a hub in a long time, so I'd say it's safe.
User avatar
dsteinschneider
Posts: 413
Joined: Sun Sep 15, 2019 11:17 pm

Re: eDRUMin version 2.3 BETA

Post by dsteinschneider »

@TOP, I've been flashing Android phone firmware for many years and have encountered my share of bricked devices that I was able to revive so my fear of flashing firmware is low.

My USB hub is a good quality D-Link unit with quality cables. I've been upgrading through the hub since the eDRUMin 4 was released. The first few times I bypassed the hub.
Post Reply