eDRUMin version 2.3 BETA

User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

Changes in build 2
  • Fixed a firmware bug preventing the iOS app from working properly.
  • Fixed an issue with turning on velocity curves.
  • Improved the hihat position stabilization when using a hihat stand with very loose tension.
  • Fixed hihat position CC not always being sent on the correct channel.
  • Highpass filter control no longer hidden behind other controls.
Stereo Anthony
Posts: 3
Joined: Thu Feb 03, 2022 12:48 am

Re: eDRUMin version 2.3 BETA

Post by Stereo Anthony »

Amazing! Thank you Rob!

I've just spent the weekend fine tuning all my drum kits and wanted to start looking into buy a new snare drum that will support positional sensing and my EDrumin10. Currently I have all Yamaha pads from a DTX 700 kit.
Aside from the DDT MS-140 I saw in your video, what else will work?
I'm looking at the Roland PD-140DS and the Drumtec Pro 3 snare drum.
Any others I've missed?
mprinz
Posts: 399
Joined: Tue Jan 07, 2020 12:39 pm

Re: eDRUMin version 2.3 BETA

Post by mprinz »

Stereo Anthony
Posts: 3
Joined: Thu Feb 03, 2022 12:48 am

Re: eDRUMin version 2.3 BETA

Post by Stereo Anthony »

mprinz wrote:
Sun May 28, 2023 8:13 pm
Do you know the Jobeky stuff?

https://jobekydrums.co.uk/product-categ ... y-e-drums/
I know of them, so I'll have to have a look.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

Does the bell input on a 3 zone ride need to be on the ring only? My bell that is wired to tip is no longer working with this version.
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

Yes, it needs to be on the ring and afaik it has always been that way.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

Ok. Thanks. I know I switched it to tip when I had it on a splitter. I took it off the splitter and thought it was working before updating to this new version but I must have been wrong. Thanks for that confirmation. I can stop chasing other issues.
Luckymethod
Posts: 62
Joined: Mon May 09, 2022 5:11 am

Re: eDRUMin version 2.3 BETA

Post by Luckymethod »

On Mac if you're using a non-admin account none of the presets are visible. It's a bit of a pain cause I have a non privileged user set up for my son for his practice and he can't switch presets when going from practicing with melodics to practicing with ez drummer.

I can provide more info if necessary.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

I think this has been asked but I forgot. Would it be possible to include a separate velocity curve for snare articulations, or scalars?
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

Seperate velocity curves for different articulations has been around for quite some time already. You just need to make sure your device is in advanced mode.
Post Reply