eDRUMin version 2.3 BETA

Post Reply
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

eDRUMin version 2.3 BETA

Post by Rob »

eDRUMin version 2.3 BETA is now available. The focus of this version is to improve positional sensing support for 'mesh pads with 3 side sensors' as well as to patch a few bugs in version 2.2 You can downgrade from this version to 2.1 or 2.2 without losing your settings.

The positional sensing has been reworked to support both my ATV AD-S13 snare and Roland PDA-120LS, and I would love to here some feedback about how well it works with other pads as well. Here is a link to information about how the controls work.

Mesh 3 Side Sensors - Positional Sensing


Improvements
  • Reworked positional sensing for 3-cone pads.
  • Added ATV AS-S13 Snare preset.
  • Added a velocity indicator to the velocity curve control.
  • Improved mouse handling in rimshot range control.
  • Flash Presets can be loaded with program change messages. (Channel 14, programs 1-32)
  • Having no inputs selected in the load settings for a device snapshot is now equivalent to having all inputs selected.
  • Pressing enter when entering preset title, description, or author will trigger 'save'.
  • Pedal Sense control has been integrated into the pedal type selector and is now off by default.
  • Updated several factory presets.
Bug Fixes since version 2.2
  • Hihat calibration not taking immediate affect.
  • Fixed note banks not accessible if pad is set as hihat cymbal.
  • Fixed issue synchronizing hihat cymbal / pedal bank changes.
  • Fixed cymbal position type not being set when loading trigger presets.
  • Fixed broken Lemon 18" Ride preset.
  • Fixed a small triggering issue with center pointed piezos.
Changes since version 2.3.0.6
  • Fixed support for Yamaha 3-zone pads / cymbals on ED8.
  • Hihat improvements when performing 'hihat barks'.
  • Fix MacOS installer issue.
  • Removed 'hub' warning.
  • Improvements to the SteadyHats feature.
eDRUMin_Control_PC_2.3.0.17.zip
eDRUMin_Control_OSX_2.3.0.17.zip
eDRUMin_Control_LINUX_2.3.0.17.zip
mprinz
Posts: 399
Joined: Tue Jan 07, 2020 12:39 pm

Re: eDRUMin version 2.3 BETA

Post by mprinz »

Again, thank you! Great work!
Unbenannt.PNG
Unbenannt.PNG (209.36 KiB) Viewed 33086 times
Rob wrote:
Sat May 20, 2023 11:22 pm

Improvements
  • Flash Presets can be loaded with program change messages. (Channel 14, programs 1-32)
So, whenever it comes VST drumming or trigger2MIDI interfaces I try to promote your outstanding work!
Lately, I the YouTube drummer 66Samus said, the DDrum DDTI trigger interface is the most affordable drum trigger. :roll:
Nope! :mrgreen:
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

Changes in build 1
  • Added digital lowpass filter for cymbal type inputs.*
  • Added a velocity indicator to the Velocity Curve control.
*not available on first generation ED4. I designed this control to tame high frequencies on my VH-13, but it would also help out on metal cymbals and other cymbals that lack sufficient dampening. The control indicates the amount of filtering happening. Using the lowpass filter introduces a small amount of latency proportion to the amount of filtering.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

Rob wrote:
Tue May 23, 2023 8:18 am
Changes in build 1
  • Added digital lowpass filter for cymbal type inputs.*
  • Added a velocity indicator to the Velocity Curve control.
*not available on first generation ED4. I designed this control to tame high frequencies on my VH-13, but it would also help out on metal cymbals and other cymbals that lack sufficient dampening. The control indicates the amount of filtering happening. Using the lowpass filter introduces a small amount of latency proportion to the amount of filtering.
Oh boy. Can't wait to try this on my LV cymbals. Just when I thought it couldn't get any better, it does!
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

Hey Rob. Any chance you could make the gain go below 1? That would help tame
hotter sensors. I assume not since you probably would have done that already.
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

No chance, however you'll notice that applying the lowpass filter in many cases reduces the effective signal level.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

I figured you would have done it already but never hurts to ask. I'll try out the low pass filter with my cymbals. Funny because I just moved my crashes to an ED4 Revision 3 or 4 from the original one and they seem much hotter so I was going to add some physical dampening in the form of butyl tape in-between the piezo case and the cymbal. But then you come out with this new feature today! I'll try this first to see the difference it makes before trying a physical dampening material. Thanks so much for your continued effort to improve amazing product.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

0524230626_HDR.jpg
0524230626_HDR.jpg (898.27 KiB) Viewed 33021 times
I'm not seeing the control for the low pass filter. Am I missing something?
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin version 2.3 BETA

Post by Rob »

It's stuck behind the piezo / switch button. Opps. Maybe change to another cymbal type, turn it on, and then go back to metal cymbal.
AKA Wayne
Posts: 255
Joined: Thu Dec 26, 2019 6:12 pm

Re: eDRUMin version 2.3 BETA

Post by AKA Wayne »

I thought that might be it. I'll try that.
Post Reply