Compatibility Issue with Roland CY-13R

Post Reply
Spinne
Posts: 4
Joined: Sat Feb 26, 2022 6:15 pm

Compatibility Issue with Roland CY-13R

Post by Spinne »

Hello,
I have a Roland CY-13R Plugged in as Roland 3-Zone Cymbal. Both with TRS-cables. The Bell channel indicates a red exclamation mark with Compatibility issue. I have to plug out both cables from the cymbal and replug them in. Then it is working...
What can I do, that the cymbal is working after power up? The edrumin is built in in a big custom case... :-)

Greetings
Holger
Pim
Posts: 98
Joined: Thu Dec 05, 2019 6:15 am

Re: Compatibility Issue with Roland CY-13R

Post by Pim »

Hi Holger,

I'm not Rob but maybe you could try what was suggested in this thread and follow the recommendations how to plug in the cables:

viewtopic.php?f=33&t=1919

Maybe that will fix it?

Best regards,
Pim
User avatar
Rob
Site Admin
Posts: 4653
Joined: Sat Aug 01, 2009 2:04 pm

Re: Compatibility Issue with Roland CY-13R

Post by Rob »

I have occasionally seen false positives pop up. I'll investigate. As a workaround you can disable to compatibility check.

Disable Compatibility Check
Post Reply