TranslationHi Rob,
it's been a while. This might be a stupid question but nevertheless: Is it possible to connect 2 Roland BT-1 instead of a 2-button-footswitch in the pedal input of a eDRUMin 10? I'd prefer to send a CC message by hitting a pad instead of pressing a footswitch.
Best regards,
Pim
Pedal Input: Using Roland BT-1?
Re: Pedal Input: Using Roland BT-1?
You can connect 2 BT-1 with a splitter to one of the trigger inputs and then send the CCs that way.
Sending CCs
The switch on a BT-1 is connected to the ring of the TRS jack. If you made a custom splitter that could combine the ring connections from each BT-1 (a normal splitter would combines the tip connections), then you could connect that to the pedal input and send your CCs that way.
Sending CCsThe switch on a BT-1 is connected to the ring of the TRS jack. If you made a custom splitter that could combine the ring connections from each BT-1 (a normal splitter would combines the tip connections), then you could connect that to the pedal input and send your CCs that way.
Re: Pedal Input: Using Roland BT-1?
Thank you, Rob, that’s great to know.