Audiofront

Posted: **Sun Jun 30, 2024 3:03 pm**

With a 2nd module, thought i experimenting with a dual zone tom.

Issue is tapping the rim piezo (without head attached) produces same note as the head piezo?

My connections re correct according to the manual for Roland dual zone. Tip => head, Ring => rim

The rim piezo is mounted on an L-Bracket attached to the shell. I'll try attached piezo directly to the shell next, but should not be any difference, but i'll try.

Not sure what i'm missing to get the dual zone to work properly.

Posted: **Sun Jun 30, 2024 3:19 pm**

How about a screenshot of your settings.

Posted: **Sun Jun 30, 2024 7:16 pm**

Rob wrote: ↑
Sun Jun 30, 2024 3:19 pm
How about a screenshot of your settings.

Posted: **Tue Jul 02, 2024 10:24 pm**

The scrolling view and the VU meters are sowing no signal from the rim sensor, so it's probably a wiring issue of the piezo is dead.

Posted: **Wed Jul 03, 2024 12:10 am**

I'll re-check wiring again and piezo. thankx Rob

Posted: **Wed Jul 03, 2024 1:01 am**

Ronyd wrote: ↑
Wed Jul 03, 2024 12:10 am
I'll re-check wiring again and piezo. thankx Rob

Wow Rob, right on the money. I use neutrik TRS jacks. Before i screwed the barrel on the ring was shorting to the ground. Very Wierd.

All good now, many thanks. Guess always have to double check and re-check.

Posted: **Wed Jul 03, 2024 1:01 am**

Ronyd wrote: ↑
Wed Jul 03, 2024 1:01 am

Ronyd wrote: ↑
Wed Jul 03, 2024 12:10 am
I'll re-check wiring again and piezo. thankx Rob
Wow Rob, right on the money. I use neutrik TRS jacks. Before i screwed the barrel on the ring was shorting to the ground. Very Wierd.

All good now, many thanks. Guess always have to double check and re-check.

Audiofront

Dual Zone toms?

Dual Zone toms?

Re: Dual Zone toms?

Re: Dual Zone toms?

Re: Dual Zone toms?

Re: Dual Zone toms?

Re: Dual Zone toms?

Re: Dual Zone toms?