Here's my FrankenKit.
Started as Yamaha DTX 452K in March this year. Only Yamaha left there is the rack and bass pedal.
16" floor tom, converted to bass. Using XM built in trigger mesh
High density mesh, similar to Drumtec Pro series.
Lemon Cymbals and Hi Hat.
How do i upload image? Seems like google photos or imgbb doesn't work.
Show us your builds!
Re: Show us your builds!
@ ffmcloud
What clutch are you using for the Lemon hihat cymbal?
amazing looking setup, i am channeling your kit for insporation
What clutch are you using for the Lemon hihat cymbal?
amazing looking setup, i am channeling your kit for insporation
Re: Show us your builds!
Hi James,
yeah had the same issue. But I ended up with the stock clutch of the hihat stand (Clutch: Tama CL08/ Stand: Tama HH75W).
I can’t tell you the exact setup, because I don’t know for sure anymore, and don’t rehearse in the next week to double check it. So I tell you how I remember ended up with my configuration.
I removed both of the top nuts and 3D-printed a thin hugh washer nearly the diameter of the inner ring of the cymbal mount.
I first fitted a felt than the cymbal. You have to press fairly hard to fit the cymbal on the clutch, but it’s only rubber so don’t be shy.
Then I used a Roland rotation stopper (Roland CYM-10) and drilled the hole to fit the clutch.
I don’t know if I used one of the top nuts to counter it, or the standard counter nut.
It barely fits on the clutch, lengthwise, but it does fit.
Quick and dirty MS-Paint sketch:
I noticed that it losen itself a bit after a bit of playing, so the cymbal begins to rotate. Maybe a drop of loctite should do the trick.
I hoped I could helped you a bit, and excuse my englisch, I’m no native.
Best regards
Simon
yeah had the same issue. But I ended up with the stock clutch of the hihat stand (Clutch: Tama CL08/ Stand: Tama HH75W).
I can’t tell you the exact setup, because I don’t know for sure anymore, and don’t rehearse in the next week to double check it. So I tell you how I remember ended up with my configuration.
I removed both of the top nuts and 3D-printed a thin hugh washer nearly the diameter of the inner ring of the cymbal mount.
I first fitted a felt than the cymbal. You have to press fairly hard to fit the cymbal on the clutch, but it’s only rubber so don’t be shy.
Then I used a Roland rotation stopper (Roland CYM-10) and drilled the hole to fit the clutch.
I don’t know if I used one of the top nuts to counter it, or the standard counter nut.
It barely fits on the clutch, lengthwise, but it does fit.
Quick and dirty MS-Paint sketch:
I noticed that it losen itself a bit after a bit of playing, so the cymbal begins to rotate. Maybe a drop of loctite should do the trick.
I hoped I could helped you a bit, and excuse my englisch, I’m no native.
Best regards
Simon
Re: Show us your builds!
Mostly Yamaha cymbals with an ATV 18" ride. Shells are Yamaha Stage Custom Birch with home built triggers.
Re: Show us your builds!
Look below the edit box and there's an "Attachments" tab, you can upload the file from there.LogeshDrumin wrote: ↑Fri Sep 03, 2021 1:18 pm
How do i upload image? Seems like google photos or imgbb doesn't work.
-
- Posts: 148
- Joined: Thu Dec 23, 2021 2:34 pm
Re: Show us your builds!
This is great! Fantastic thread. Will add mine when I get my e4 in a few weeks
-
- Posts: 148
- Joined: Thu Dec 23, 2021 2:34 pm
Re: Show us your builds!
This is a little shot of what I been a etti mg up with my rack in order to have my PC - well Mac actually - next to my kit. I only just got my ED4 - this is the first full day of use and already it’s a game changer!
It’s SO NICE to have PS on my snare and AMAZING to have an actual moving hi hat on a stand. Before that I was using the same millenium hi hat and stand but I was zip tying the pedal out the way, raising it up and putting the seperate alesis pedal underneath. That is no more! Thank god - well, thank Audiofront actually!
Anyway, I also put my A2E rack Tom of my kick instead of using an alesis pad.
It does actually feel like a real kit now, rather than some cramped up toy!
It’s also super nice to record and have differing velocity strikes lol
(Edit- looking at the image, you can see this is before I had set up the millenium ho hat pedal. You can see the alesis foot pedal there still. It’s also much tidier than This now!)
It’s SO NICE to have PS on my snare and AMAZING to have an actual moving hi hat on a stand. Before that I was using the same millenium hi hat and stand but I was zip tying the pedal out the way, raising it up and putting the seperate alesis pedal underneath. That is no more! Thank god - well, thank Audiofront actually!
Anyway, I also put my A2E rack Tom of my kick instead of using an alesis pad.
It does actually feel like a real kit now, rather than some cramped up toy!
It’s also super nice to record and have differing velocity strikes lol
(Edit- looking at the image, you can see this is before I had set up the millenium ho hat pedal. You can see the alesis foot pedal there still. It’s also much tidier than This now!)
- Attachments
-
- E1A9CBC1-27C9-46FC-ADB0-AEB04C807676.jpeg (1.99 MiB) Viewed 7838 times
-
- Posts: 148
- Joined: Thu Dec 23, 2021 2:34 pm
Re: Show us your builds!
I guess this is how I’m working with it atm.
It’s a standard beginner kit from eBay converted with jobeky triggers.
Side triggers for The toms and a centre mounted bar style trigger for the snare and kick.
Jobeky heads too, I really like them actually, they feel high quality. I need to replace my Tom head at some point.
The cymbals are probably the thing that I don’t really like atm. I can’t really get them dialled in but then again they are really crap alesis cymbals. (They really hurt my wrists actually.) I think I’m going to do some low volume DIY wizardry at some point. One I’m done getting an ed10 lol
It’s a standard beginner kit from eBay converted with jobeky triggers.
Side triggers for The toms and a centre mounted bar style trigger for the snare and kick.
Jobeky heads too, I really like them actually, they feel high quality. I need to replace my Tom head at some point.
The cymbals are probably the thing that I don’t really like atm. I can’t really get them dialled in but then again they are really crap alesis cymbals. (They really hurt my wrists actually.) I think I’m going to do some low volume DIY wizardry at some point. One I’m done getting an ed10 lol
- Attachments
-
- 27251F7B-1050-418D-9176-9829648D7FD0.jpeg (83.64 KiB) Viewed 7835 times
- dsteinschneider
- Posts: 415
- Joined: Sun Sep 15, 2019 11:17 pm
Re: Show us your builds!
Hi Rabid,
Your monitor stands look like contraband
Doug
Your monitor stands look like contraband
Doug
-
- Posts: 148
- Joined: Thu Dec 23, 2021 2:34 pm
Re: Show us your builds!
Haha it took me a while to realise what you meant there. You mean the bricks? They are blocks of dehydrated coconut husks. I use them to grow veg in when they been hydrated. They do look like bricks of heroin though your right!dsteinschneider wrote: ↑Mon Jan 10, 2022 3:59 pmHi Rabid,
Your monitor stands look like contraband
Doug
That shits halarious, imagine how rock star that would be!