Page 1 of 1
Need advice and help
Posted: Sun Mar 13, 2022 9:46 pm
by Marell69
Hi everyone,
I'm planning to buy edrumin for my e-drum setup.
Will a positional sensing work with PDA 120LS-BK? It is not a center mounted trigger pad, so... Please help me on this.
My other question is, can I solve the double kick notes issue with the edrumin module?
Thanks a lot.
Marton
Re: Need advice and help
Posted: Mon Mar 14, 2022 1:57 am
by perceval
PS needs a center mounted trigger. Seemed you knew that already.
Double triggering on kick might be from a very bouncy pad that you could try to tame down,
or,
playing technique. Most of the time, it is user error, you will need to practice hitting the bass trigger cleanly, without letting the beater bounce twice on the trigger pad.
Re: Need advice and help
Posted: Tue Mar 15, 2022 9:33 am
by lalo
what is your e-drum setup?
Re: Need advice and help
Posted: Tue Mar 15, 2022 8:40 pm
by Marell69
Thanks for the help.
My setup now is the following:
-Padtech NP-10B kick
-Roland PDA 120LSBK snare
-Roland PDX-100 x2 toms
-Roland PDX-12 floor toms
-Roland VH-11 h-h
-Alesis DMPAD 14" x2 crash
-Roland CY-8 ride
-TD1 module
Re: Need advice and help
Posted: Wed Mar 16, 2022 3:30 pm
by lalo
Apart from the alesis crashes which I don’t know, the rest will work just fine with the edrumin
Re: Need advice and help
Posted: Thu Mar 17, 2022 1:42 pm
by MisterE
Marell69 wrote: ↑Sun Mar 13, 2022 9:46 pm
My other question is, can I solve the double kick notes issue with the edrumin module?
Absolutely, you can use the eDRUMin software to perform, effectively, as with a Roland module, re-trigger cancellation. However, the eDRUMin does it a bit differently by use of the "Hold" time.