in build 20 i also can't get a splash sound.
in build 14 i only have to maximise splash sense, I can trigger the splash sound easily.
I have a real Hihat stand with vh-10.
the hihat stand is from Millenium 850.
maybe it is to slow?
The Changes since build 15 I tried 15,16,18,20 but no Splash possible for me.
What settings do you use to get a reliable hihat splash sound?
regards, Peter
eDRUMin 1.3 BETA now available (again)
Re: eDRUMin 1.3 BETA now available (again)
Attach a screenshot of your settings and I'll take a look.
Re: eDRUMin 1.3 BETA now available (again)
One of the things I did to troubleshoot the splash was to remove as much as I could from equation. I removed the cymbal. Then worked the controller with my hand to take the stand out of the way. My goal was to get the splash note to flash in the controller. I finally did when I set my splash sensitivity to 55. My mode is set to Pedal and gain is set to 30.pwohlfah wrote:in build 20 i also can't get a splash sound.
in build 14 i only have to maximise splash sense, I can trigger the splash sound easily.
I have a real Hihat stand with vh-10.
the hihat stand is from Millenium 850.
maybe it is to slow?
The Changes since build 15 I tried 15,16,18,20 but no Splash possible for me.
What settings do you use to get a reliable hihat splash sound?
regards, Peter
Re: eDRUMin 1.3 BETA now available (again)
Thanks for your replys
I am currently Using MODO drum.
I attached a screen shot of the Pedal editor with the settings that works for me
with 1.3 buld 14
Peter
I am currently Using MODO drum.
I attached a screen shot of the Pedal editor with the settings that works for me
with 1.3 buld 14
Peter
- Attachments
-
- working with build 14 but not 15, 16, 20
- screen shot pedal editor for hihat .png (259.94 KiB) Viewed 966 times
Re: eDRUMin 1.3 BETA now available (again)
Try putting the xtalk control at about 40 and increase the travel control a bit too.
Re: eDRUMin 1.3 BETA now available (again)
unfortunately there is no change.
I won't get a splash.
the chick sound is triggered, but not the splash.
splash is also not shown in the eDrumin app.
even without cymbal with the fingers I am not able to invoke the hihat slash with th vh-10
i will try at the weekend.
Thank you,
Peter
I won't get a splash.
the chick sound is triggered, but not the splash.
splash is also not shown in the eDrumin app.
even without cymbal with the fingers I am not able to invoke the hihat slash with th vh-10
i will try at the weekend.
Thank you,
Peter
Re: eDRUMin 1.3 BETA now available (again)
Next week I'll put together a couple videos. That should help.
Re: eDRUMin 1.3 BETA now available (again)
Btw, it still doesn't look like you're on build 20.
Re: eDRUMin 1.3 BETA now available (again)
You can download modo drum demo and it will work in full mode for 10 days! I just downloaded it and set up the hihat and it triggers splashes and chicks perfectly, attached the hihat mapping,
My edrumin controller looks like this:
- Attachments
-
- Screenshot 2020-09-04 at 10.52.10.png (1.84 MiB) Viewed 948 times
Re: eDRUMin 1.3 BETA now available (again)
Rob, I am now on build 20, but the screenshot i Attached was 14 (the build that was working for my Hihat)
Thank you for your effort, Lalo and Rob!.
I really apreciate your help,
I will try again on saturday night, when I have time!
Peter
Thank you for your effort, Lalo and Rob!.
I really apreciate your help,
I will try again on saturday night, when I have time!
Peter