eDRUMin 1.2 BETA is now available

Dewaaachner
Posts: 26
Joined: Wed Jan 22, 2020 10:59 am
Location: Germany

Re: eDRUMin 1.2 BETA is now available

Post by Dewaaachner »

Thank you Rob,

I'm using Jman stealth conversion kits. The ones, which are compatible for the 2box drumit five mk1.

Can you suggest a trigger preset to start with?

Cheers, Frank
Drumit5 & eDRUMin, stealth cymbal Triggers, Millenium low noise Cymbals
User avatar
Rob
Site Admin
Posts: 4631
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin 1.2 BETA is now available

Post by Rob »

Dewaaachner wrote:I'm using Jman stealth conversion kits. The ones, which are compatible for the 2box drumit five mk1.

Can you suggest a trigger preset to start with?
Presets aren't going to work for conversion kits. Trigger settings depend so much on build parameters, and no two builds are going to be the same. You'll just have to use the provided controls to roll your own.
User avatar
Rob
Site Admin
Posts: 4631
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin 1.2 BETA is now available

Post by Rob »

Changes in Build 4
  • When loading user presets, you can now choose what elements to load (trigger settings, velocity curve, note assignments).
  • Fixed a bug for macOS that prevented user presets from being saved.
  • Fixed UI updating issues, mostly apparent on macOS.
vandroiy
Posts: 59
Joined: Thu Nov 07, 2019 11:11 am

Re: eDRUMin 1.2 BETA is now available

Post by vandroiy »

My ATV HiHat Cymbal and both of my PCY-135 Crashes suddenly Choke all the time (After Touch). I first thought on cymbals was going bad, but it seems to be something different.
Anybody else experience this or has any tips?
Dewaaachner
Posts: 26
Joined: Wed Jan 22, 2020 10:59 am
Location: Germany

Re: eDRUMin 1.2 BETA is now available

Post by Dewaaachner »

Rob wrote:
Dewaaachner wrote:I'm using Jman stealth conversion kits. The ones, which are compatible for the 2box drumit five mk1.

Can you suggest a trigger preset to start with?
Presets aren't going to work for conversion kits. Trigger settings depend so much on build parameters, and no two builds are going to be the same. You'll just have to use the provided controls to roll your own.
Ok, thanx for the info.
Drumit5 & eDRUMin, stealth cymbal Triggers, Millenium low noise Cymbals
User avatar
Rob
Site Admin
Posts: 4631
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin 1.2 BETA is now available

Post by Rob »

vandroiy wrote:My ATV HiHat Cymbal and both of my PCY-135 Crashes suddenly Choke all the time (After Touch). I first thought on cymbals was going bad, but it seems to be something different.
Anybody else experience this or has any tips?
I definitely made changes in this area. I will have a look today. Do you have other cymbals that aren't experiencing choking issues?
User avatar
dsteinschneider
Posts: 411
Joined: Sun Sep 15, 2019 11:17 pm

Re: eDRUMin 1.2 BETA is now available

Post by dsteinschneider »

MachRider wrote:I am still playing with the velocity curves, trying to figure out what gives best feel, but right now it seems like a slight upward on the low end and pulling the max a little left to boost the heavier hits helps, but not having to make drastic, near-max-capability adjustments like before with a max gain of 7.
I did the same curve for my 16" floor tom (UFO center piezo)
User avatar
dsteinschneider
Posts: 411
Joined: Sun Sep 15, 2019 11:17 pm

Re: eDRUMin 1.2 BETA is now available

Post by dsteinschneider »

I updated to 1.2 build 4 and didn't make any other changes and everything is playing well for my practicing. I had to click on maps and choose Superior Drummer again. I also had to power cycle the eDRUMin my hi-hat pedal is connected to because it wasn't responding.

@vandroiy - My PCY135 and PCY155 are playing fine - the choke wasn't working until I clicked on the maps and chose Superior Drummer.
vandroiy
Posts: 59
Joined: Thu Nov 07, 2019 11:11 am

Re: eDRUMin 1.2 BETA is now available

Post by vandroiy »

dsteinschneider wrote:I updated to 1.2 build 4 and didn't make any other changes and everything is playing well for my practicing. I had to click on maps and choose Superior Drummer again. I also had to power cycle the eDRUMin my hi-hat pedal is connected to because it wasn't responding.

@vandroiy - My PCY135 and PCY155 are playing fine - the choke wasn't working until I clicked on the maps and chose Superior Drummer.
My choke is working to well ;)

My PCY155 seems to work, the other 3 cymbals choke a lot when I hit them. And when it happens, it stays like that. It honestly feels like a physical issues with the cymbals (if it had not happened on 3 at the same time)

Also, all 3 cymbals seem to trigger the bow a lot of the time I hit the edge.
perceval
Posts: 307
Joined: Sat Aug 06, 2011 4:59 pm

Re: eDRUMin 1.2 BETA is now available

Post by perceval »

I will be posting presets for the PCY135 tomorrow, most probably.

I just don't have access to my kit today.
Post Reply