BT-1 Trigger unintentional flamming

Post Reply
owenthesheppard
Posts: 5
Joined: Wed Nov 10, 2021 3:23 pm

BT-1 Trigger unintentional flamming

Post by owenthesheppard »

Hi all

When using the BT-1 trigger bars, plugged in to a single input on the edrumin 8 I am getting flammed triggers every 5 - 10 hits

Sometimes it can happen multiple hits in a row. Sometimes I can go for 10-15 seconds with it happening but eventually it always happens.

This obviously is undesirable as it triggers two notes/sounds in quick succession making a flammed sound.

I'm using it as extra trigger inputs for my Roland SPDSX Pro, which only has four trigger inputs.

However, when I plug the BT-1 directly in to the Roland SPDSX Pro, the flaming goes away.

Any help is appreciated, this is really confusing me.
User avatar
Rob
Site Admin
Posts: 4627
Joined: Sat Aug 01, 2009 2:04 pm

Re: BT-1 Trigger unintentional flamming

Post by Rob »

You probably need to dial in your settings. Have you watched this video?

https://youtu.be/v9_w32TWKZ0?si=3AWeKOE2U6p9t2x_
Post Reply