RHH135 compatibility

Post Reply
jpm2112
Posts: 1
Joined: Sun Aug 27, 2023 11:21 pm

RHH135 compatibility

Post by jpm2112 »

Hello Everyone,

I have searched through the forums and there doesn't seem to be a definite answer if Yamaha's RHH135 works well wirheDRUMin.

I am looking to use my RHH125 through eDRUMin trigger SD3 on Mac. Is there now a preset for the RHH135 or recommended settings?


Thanks in advance,


JP
User avatar
Rob
Site Admin
Posts: 4681
Joined: Sat Aug 01, 2009 2:04 pm

Re: RHH135 compatibility

Post by Rob »

While I don't feel the RHH135 is the best of hihat controllers, it is supported. There isn't a specific preset for it, but the HH-65 preset should work just fine.
perceval
Posts: 311
Joined: Sat Aug 06, 2011 4:59 pm

Re: RHH135 compatibility

Post by perceval »

and if you want to have all levels of from close to open, disconnect the RHH135 controller, buy a square FSR, tape that to a board that slides under the HH pedal, stick a piece of foam on the FSR and connect the wires from the HH input on the eDRUMin to the FSR, no polarity.

Play with foam densities to get perfect feel.

Crazy simple and cheap, yet works amazing.
Post Reply