eDRUMin with Simmons 80s SDS era pads?

Post Reply
cdodkin
Posts: 5
Joined: Sun Apr 24, 2022 2:55 pm

eDRUMin with Simmons 80s SDS era pads?

Post by cdodkin »

Has anyone had their 80s Simmons SDS era pads working with the eDRUMin?

I have a set of Simmons SDS8 pads heading my way, and would like to use them to control drum plugins in Logic Pro.

Would be a great solution if eDRUMin can accept the SDS pads as a suitable trigger

Any help much appreciated - did a search but didn't see anything that answered the question specifically - Thx.
perceval
Posts: 307
Joined: Sat Aug 06, 2011 4:59 pm

Re: eDRUMin with Simmons 80s SDS era pads?

Post by perceval »

I believe the Simmons were triggered via piezo, if so, eDRUMin will recognize the signal.

Send a pad to Rob and he'll come up with a preset! :)
Vinito
Posts: 3
Joined: Thu Apr 21, 2022 2:00 am

Re: eDRUMin with Simmons 80s SDS era pads?

Post by Vinito »

You might suspect that the foam on an 80's trigger might have dried up a bit and have some crumbling. So maybe take a look and update (replace) the foam. You can always test them first before bothering with this step so you're not replacing foam on a broken trigger and replace the piezo or trigger instead.
Otherwise, if it's just yer basic piezo trigger, seems like it ought to work.
cdodkin
Posts: 5
Joined: Sun Apr 24, 2022 2:55 pm

Re: eDRUMin with Simmons 80s SDS era pads?

Post by cdodkin »

Well I should know next week - Pads and eDRUMin units are inbound!
cdodkin
Posts: 5
Joined: Sun Apr 24, 2022 2:55 pm

Re: eDRUMin with Simmons 80s SDS era pads?

Post by cdodkin »

Vinito wrote:
Mon Apr 25, 2022 12:11 pm
You might suspect that the foam on an 80's trigger might have dried up a bit and have some crumbling. So maybe take a look and update (replace) the foam. You can always test them first before bothering with this step so you're not replacing foam on a broken trigger and replace the piezo or trigger instead.
Otherwise, if it's just yer basic piezo trigger, seems like it ought to work.
No foam issues with 80s Simmons Pads - the piezo was glued directly to a plywood panel inside the drum shell.
cdodkin
Posts: 5
Joined: Sun Apr 24, 2022 2:55 pm

Re: eDRUMin with Simmons 80s SDS era pads?

Post by cdodkin »

Things are coming together nicely!

Image
User avatar
Rob
Site Admin
Posts: 4624
Joined: Sat Aug 01, 2009 2:04 pm

Re: eDRUMin with Simmons 80s SDS era pads?

Post by Rob »

Great pic.
Post Reply