TranslationI have the ME Quattro -- four inputs. Just got it, sat down, read the manual, plugged in stuff and tried it out. I'm excited. So many things I can do with it.
I can't find a way to adjust the velocity curve of an expression pedal. The pedal (Roland EV-5) connects ok, I calibrated, it works fine, 0/127. But in that square window that, in the manual, should be the velocity curve, I see nothing. I followed the words in the manual, but don't see any min/max fields to mess with. What am I missing?
Firmware is the latest 2.8.2.22
Thanks,
Steve
Need help setting curve
Re: Need help setting curve (solved)
I solved it on my own. All I had to do was to reboot everything and the curve showed up. Duh! Everything else in the setup software was working just fine, so I don't know why it needed a reboot for just this.
Then it took me a while to figure out how to use it. I had to poke and drag, reinsert the pedal, and finally those two little circles -- the vector handles -- showed up. Helpful suggestion: say a little more about the handles and give a few more steps in the manual so other won't have to struggle as I did. I didn't see them in the manual until I found them (by accident, pretty much) in the app. Then I could see them in the manual.
Steve
Then it took me a while to figure out how to use it. I had to poke and drag, reinsert the pedal, and finally those two little circles -- the vector handles -- showed up. Helpful suggestion: say a little more about the handles and give a few more steps in the manual so other won't have to struggle as I did. I didn't see them in the manual until I found them (by accident, pretty much) in the app. Then I could see them in the manual.
Steve