New Features

• Optional independent gain control for TIP and RING.
• Rotary Encoder support for pedal inputs.
• Control App preference for naming convention (Middle C = C2, C3, C4, or C5).
• Device setting to always send positional CCs.
• Option to set the length of notes for each input (30ms -> 8s).

Improvements

• Preset Manager remembers last preset type.
• Improvements when working with load options for device snapshots.
• UX improvements.
• Reworked the way switch type pedals are processed to make them more flexible.

Bug Fixes

• Fixed couldn't set 'Choke' when editing drum maps.
• Fixed an issue with the Abby Road Drum Map.
• Fixed note off not being sent if note 0 was being triggered.
• Fixed crashing when iOS control application tries to sends presets.
• Fixed bell triggering issue with 3-Zone (dual input) cymbals after loading a device snapshot.
• Linux--fixed a possible issue updating firmware of a device plugged into host port.

New Features

• Added switch-modes for sustain / footswitch type pedals so that most modes have press/release, short press/long press, and inc/dec sub-modes.
• Switch type pedals can now control transformer transpose and transformer channel.
• 7bit or 14bit parameter values can be inserted into sysEx messages and all pedal types can now send them.

Improvements

• UI cosmetic / layout / organization improvements.
• Reduces switch type processing latency / jitter to less than 0.5ms.
• Improved support for StudioLogic SLP3-D.
• Improved support for rotary encoders.
• Parameter feedback support for 14bit CC.
• Parameter feedback improvements when using transformer.
• Updated the manual.
• Lots of small bug fixes.

Changes in build 10

• Fixed a issue with auto saving
• Improved parameter feedback on single input MIDI Expression.

Changes in build 12

• Fixed an issue with resetting inputs.

Changes in build 13

• Fixed issues loading device snapshots.

New Features

• New hihat pedal note algorithm for hihat setups using a hihat stand.
• Added support for cymbals that use FSRs for choking.

Improvements

• Improved timing / reduced jitter of closed pedal notes.

Bug Fixes since version 3.2.0

• Fixed display issues when using hihat 'impact' mode.
• Fixed adjusting hihat levels on Linux could cause the UI to hang.
• Fixed devices connected to USB host port were not getting their MIDI filtered for crosstalk.
• Fixed some potential issues with devices connected to the host port of ED8.
• Fixed a bug with the MIDI monitor that could lead to a hardware crash.
• A small fix for for Yamaha cymbals that can cause an edge note to sometimes register as a bell.

Changes in version 2.9.2.7

• Added support for Digitech FS3X / TC Helicon switch 3 (3-button footswitches).
• Added support for Nord Triple Pedal / StudioLogic SLPD-3 (3 pedal piano sustain).
• MIDI Transformer can now transform MIDI message types.
• Added support for 14 bit Control Change messages.

Bug Fixes since version 2.9.2

• Fixed a possible hardware crash when using MIDI Monitor.
• Fixed a firmware issue that caused compatibility issues on Linux.
• Fixed a bug when using a pedal to change the Transformer MIDI Channel.

Changes in build 13

• Fixed 2nd button of footswitch not always sending keystroke modifiers.
• Transformer can now set note velocity to ind / dec by specified value.
• Fixed an issue with TC Helocon Switch 3 support.

Changes in build 18

• Fixed some transformer bugs.
• Windows version will now minimize when clicking its icon in the taskbar.
• MIDI Monitor filter is now configurable.

MIDI Controlled Looper plugin.
Changes in version 1.0.1

• Fixed UI not always reopening properly.
• Added tooltips to indicate MIDI assignments.
• Changed duplicate logic.

Notes: Drag and drop not supported for Linux.

New Features

• Added 'swap buttons' for footswitches.

Improvements and bug fixes

• Fixed MIDI Monitor issue for hihat / note mode.
• Fixed expression pedal controlling transformer channel could sometimes set the channel to 0.
• Improved visual feedback consistency on Transformer page.
• Fixed an issue that could result in footswitches appearing stuck in the UI (Windows).
• Crash notice can now be properly closed.
• Fixed NRPN showing for incompatible devices.
• Fixed plugin version crash on removal in some hosts.
• Fixed plugin version last values not being properly restored.
• Fixed plugin version switching input would dirty the project.
• Fixed plugin version UI issues when resizing.

Changes in build 7

• Snapshots can now be sorted by most recent or alphabetically.
• Added confirmation dialogs for deleting and overwriting snapshots.
• Changed MIDI Note Off message value to 0.
• Fixed plugin Control Application wasn’t saving the sensitivity setting.
• Fixed plugin Control Application wasn’t saving the polarity setting.
• Fixed plugin Control Application wasn’t updating the UI after loading a snapshot.

New Features

• Added 'Swap Buttons' control for footswitches.

Improvements and Bug Files

• ED10R2 plugged into ED10 sometimes show incorrect icon.
• Loading hihat presets properly sets the pad function.
• Entering a note by double clicking a note control will now audition the correct sound.
• Double right-clicking a note control will no longer start editing it.
• Fixed xTALK control on pedal editor not drawing correctly.
• Note control will show 'AT' when not using choke note.
• Improved tooltip for choke note.
• Cosmetic improvements.
• Control application performance optimizations.
• Stability improvements.

Users who purchase an ED4 after August 29th will need to use version 2.0.2 or greater.

MIDI Controlled Looper plugin.
Changes in build 4

• Fixed learn host automation issues.
• Fixed potential crash if UI closed by host.

Changes in build 3

• UI optimizations.

Changes in build 2

• Bug Fixes
• Cosmetic Improvements.
• UI optimizations.

Notes: Drag and drop not supported for Linux.

Changes in version 1.6.2

• Updated graphics library.
• Bug fixes.

Supports Windows7 and up, macOS 10.9 and up.