I use an A2E kit with internal triggers under Real Feel heads. It works great in the studio with SD3. We will be doing some live shows this summer and will share the drum kit with other drummers (not separate bands) who are not used to playing mesh pads and triggered sounds. Has anyone successfully ...

The device does a compatibility check to try to prevent sending DC voltage to dual piezo pads. Try disabling the compatibility check and see if your cymbal works properly. The way to do that is described at the end of this thread. https://www.audiofront.net/forum/viewtopic.php?f=33&t=988&p=...

Can you please confirm that a dual piezo pad works fine on that input? I moved my snare to that input and it appears to work. It feels a little quirky (inconsistent) but it works. I moved my Yamaha cymbal back to that input and changed to the corresponding pad type, selected Cymbal 4 from the SD3 m...

I just added my 3rd Yamaha cymbal (PCY135). My previous two (PCY135 and 155) have been working perfectly using the Yamaha 3-zone cymbal preset. When I plug in the new cymbal it does not consistently register the input signal. I've swapped cables and the cables work on all the other cymbals. And I us...

No, sir, due to the three outside trigger cones you won't get positional sensing. I also had the ATV 13" pad, and the DDT pad but I WANTED to try that positional sensing having SD3 and the eDrumIn. Maybe should look for the DDT MS-140. I forgot to mention this. With it's center cone trigger sy...

Hi guys! Any recommendations for units with multiple outputs and low latency, stable with Mac? I also love these devices: https://www.sweetwater.com/store/detail/XR18--behringer-by-air-xr18-tablet-controlled-digital-mixer This might also be an option, if you do some in ear monitoring etc. I guess, ...

You might also look at the ATV three-trigger 13" snare - the ATV XD-P13. It's only $159 and should trigger as well as the Roland. I have one and have been impressed. https://edrumcenter.com/collections/atv-electronic-drums/products/atv-xp-13-13-electronic-snare-tom Do you use this with SD3? Ar...

Want to revisit this topic. I'm planning to use my A2E setup live in a few months. I use 2-eDrumin units to a usb hub -> MacbookPro 16" -> usb-c MOTU M2->headphone and line out to mixer. It works great with SD3 but I'm looking for something with multiple outputs so I can send the snare, kick an...

Thank you, Rob for the support.
Was able to reset and program the unit.

I've done several firmware updates in the past and usually very careful but for some reason, today I updated the firmware while plugged into a usb hub and seem to have bricked one of my edrumin (4) :( I tried to plug it in separately on both Mac and PC but it's no longer seen by the controller progr...